International Journal Papers
Permanent URI for this collectionhttp://dl.cerist.dz/handle/CERIST/17
Browse
35 results
Search Results
Item Networked Wireless Sensors, Active RFID, and Handheld Devices for Modern Car Park Management: WSN, RFID, and Mob Devs for Car Park Management(IGI Global, 2015-07-01) Djenouri, Djamel; Karbab, Elmouatezbillah; Boulkaboul, Sahar; Bagula, AntoineNetworked wireless sensors, actuators, RFID, and mobile computing technologies are explored in this paper on the quest for modern car park management systems with sophisticated services over the emerging internet of things (IoT), where things such as ubiquitous handheld computers, smart ubiquitous sensors, RFID readers and tags are expected to be interconnected to virtually form networks that enable a variety of services. After an overview of the literature, the authors propose a scalable and lowcost car parking framework (CPF) based on the integration of aforementioned technologies. A preliminary prototype implementation has been performed, as well as experimentation of some modules of the proposed CPF. The results demonstrate proof of concept, and particularly reveal that the proposed approach for WSN deployment considerably reduces the cost and energy consumption compared to existing solutions.Item DFIOT: Data Fusion for Internet of Things(Springer Science, 2020) Boulkaboul, Sahar; Djenouri, DjamelIn Internet of Things (IoT) ubiquitous environments, a high volume of heterogeneous data is produced from different devices in a quick span of time. In all IoT applications, the quality of information plays an important role in decision making. Data fusion is one of the current research trends in this arena that is considered in this paper. We particularly consider typical IoT scenarios where the sources measurements highly conflict, which makes intuitive fusions prone to wrong and misleading results. This paper proposes a taxonomy of decision fusion methods that rely on the theory of belief. It proposes a data fusion method for the Internet of Things (DFIOT) based on Dempster–Shafer (D–S) theory and an adaptive weighted fusion algorithm. It considers the reliability of each device in the network and the conflicts between devices when fusing data. This is while considering the information lifetime, the distance separating sensors and entities, and reducing computation. The proposed method uses a combination of rules based on the Basic Probability Assignment (BPA) to represent uncertain information or to quantify the similarity between two bodies of evidence. To investigate the effectiveness of the proposed method in comparison with D–S, Murphy, Deng and Yuan, a comprehensive analysis is provided using both benchmark data simulation and real dataset from a smart building testbed. Results show that DFIOT outperforms all the above mentioned methods in terms of reliability, accuracy and conflict management. The accuracy of the system reached up to 99.18% on benchmark artificial datasets and 98.87% on real datasets with a conflict of 0.58%. We also examine the impact of this improvement from the application perspective (energy saving), and the results show a gain of up to 90% when using DFIOT.Item Multiple Benefits through Smart Home Energy Management Solutions—A Simulation-Based Case Study of a Single-Family-House in Algeria and Germany(mdpi, 2019-04-23) Ringel, Marc; Laidi, Roufaida; Djenouri, DjamelFrom both global and local perspectives, there are strong reasons to promote energy efficiency. These reasons have prompted leaders in the European Union (EU) and countries of the Middle East and North Africa (MENA) to adopt policies to move their citizenry toward more efficient energy consumption. Energy efficiency policy is typically framed at the national, or transnational level. Policy makers then aim to incentivize microeconomic actors to align their decisions with macroeconomic policy. We suggest another path towards greater energy efficiency: Highlighting individual benefits at microeconomic level. By simulating lighting, heating and cooling operations in a model single-family home equipped with modest automation, we show that individual actors can be led to pursue energy efficiency out of enlightened self-interest. We apply simple-to-use, easily, scalable impact indicators that can be made available to homeowners and serve as intrinsic economic, environmental and social motivators for pursuing energy efficiency. The indicators reveal tangible homeowner benefits realizable under both the market-based pricing structure for energy in Germany and the state-subsidized pricing structure in Algeria. Benefits accrue under both the continental climate regime of Germany and the Mediterranean regime of Algeria, notably in the case that cooling energy needs are considered. Our findings show that smart home technology provides an attractive path for advancing energy efficiency goals. The indicators we assemble can help policy makers both to promote tangible benefits of energy efficiency to individual homeowners, and to identify those investments of public funds that best support individual pursuit of national and transnational energy goals.Item Machine Learning for Smart Building Applications: Review and Taxonomy(ACM, 2019-03) Djenouri, Djamel; Laidi, Roufaida; Djenouri, Youcef; Balasingham, IlangkoThe use of machine learning (ML) in smart building applications is reviewed in this paper. We split existing solutions into two main classes, occupant-centric vs. energy/devices centric. The first class groups solutions that use ML for aspects related to the occupants, including (1) occupancy estimation and identification, (2) activity recognition, and (3) estimating preferences and behavior. The second class groups solutions that use ML to estimate aspects related either to energy or devices. They are divided into three categories, (1) energy profiling and demand estimation, (2) appliances profiling and fault detection, and (3) inference on sensors. Solutions in each category are presented, discussed and compared, as well as open perspectives and research trends. Compared to related state-of-the-art survey papers, the contribution herein is to provide a comprehensive and holistic review from the ML perspectives rather than architectural and technical aspects of existing building management systems. This is by considering all types of ML tools, buildings, and several categories of applications, and by structuring the taxonomy accordingly. The paper ends with a summary discussion of the presented works, with focus on lessons learned, challenges, open and future directions of research in this field.Item Machine Learning for Smart Building Applications: Review and Taxonomy(ACM, 2019-03) Djenouri, Djamel; Laidi, Roufaida; Djenouri, Youcef; Balasingham, IlangkoThe use of machine learning (ML) in smart building applications is reviewed in this paper. We split existing solutions into two main classes, occupant-centric vs. energy/devices centric. The first class groups solutions that use ML for aspects related to the occupants, including (1) occupancy estimation and identification, (2) activity recognition, and (3) estimating preferences and behavior. The second class groups solutions that use ML to estimate aspects related either to energy or devices. They are divided into three categories, (1) energy profiling and demand estimation, (2) appliances profiling and fault detection, and (3) inference on sensors. Solutions in each category are presented, discussed and compared, as well as open perspectives and research trends. Compared to related state-of-the-art survey papers, the contribution herein is to provide a comprehensive and holistic review from the ML perspectives rather than architectural and technical aspects of existing building management systems. This is by considering all types of ML tools, buildings, and several categories of applications, and by structuring the taxonomy accordingly. The paper ends with a summary discussion of the presented works, with focus on lessons learned, challenges, open and future directions of research in this field.Item Data Mining-Based Decomposition for Solving the MAXSAT Problem: Toward a New Approach(IEEE, 2017-06) Djenouri, Youcef; Habbas, Zineb; Djenouri, DjamelA new approach decomposes a MAXSAT instance and then applies clustering via data mining decomposition techniques, with every cluster resulting from the decomposition separately solved to construct a partial solution. All partial solutions are then merged to build the global solution.Item Optimal Placement of Relay Nodes Over Limited Positions in Wireless Sensor Networks(IEEE, 2017-04) Bagaa, Miloud; Cheli, Ali; Djenouri, Djamel; Taleb, Tarik; Balasingham, Ilangko; Kansanen, KimmoThis paper tackles the challenge of optimally placing relay nodes (RNs) in wireless sensor networks given a limited set of positions. The proposed solution consists of: 1) the usage of a realistic physical layer model based on a Rayleigh blockfading channel; 2) the calculation of the signal-to-interferenceplus- noise ratio (SINR) considering the path loss, fast fading, and interference; and 3) the usage of a weighted communication graph drawn based on outage probabilities determined from the calculated SINR for every communication link. Overall, the proposed solution aims for minimizing the outage probabilities when constructing the routing tree, by adding a minimum number of RNs that guarantee connectivity. In comparison to the state-of-the art solutions, the conducted simulations reveal that the proposed solution exhibits highly encouraging results at a reasonable cost in terms of the number of added RNs. The gain is proved high in terms of extending the network lifetime, reducing the end-to-end- delay, and increasing the goodput.Item Energy-Aware Constrained Relay Node Deployment for Sustainable Wireless Sensor Networks(IEEE, 2017-03) Djenouri, Djamel; Bagaa, MiloudThis paper considers the problem of communication coverage for sustainable data forwarding in wireless sensor networks, where an energy-aware deployment model of relay nodes (RNs) is proposed. The model used in this paper considers constrained placement and is different from the existing one-tiered and two-tiered models. It supposes two different types of sensor nodes to be deployed, i) energy rich nodes (ERNs), and ii) energy limited nodes (ELNs). The aim is thus to use only the ERNs for relaying packets, while ELN’s use will be limited to sensing and transmitting their own readings. A minimum number of RNs is added if necessary to help ELNs. This intuitively ensures sustainable coverage and prolongs the network lifetime. The problem is reduced to the traditional problem of minimum weighted connected dominating set (MWCDS) in a vertex weighted graph. It is then solved by taking advantage of the simple form of the weight function, both when deriving exact and approximate solutions. Optimal solution is derived using integer linear programming (ILP), and a heuristic is given for the approximate solution. Upper bounds for the approximation of the heuristic (versus the optimal solution) and for its runtime are formally derived. The proposed model and solutions are also evaluated by simulation. The proposed model is compared with the one-tiered and two-tiered models when using similar solution to determine RNs positions, i.e., minimum connected dominating set (MCDS) calculation. Results demonstrate the proposed model considerably improves the network life time compared to the one-tiered model, and this by adding a lower number of RNs compared to the two-tiered model. Further, both the heuristic and the ILP for the MWCDS are evaluated and compared with a state-of-the-art algorithm. The results show the proposed heuristic has runtime close to the ILP while clearly reducing the runtime compared to both ILP and existing heuristics. The results also demonstrate scalability of the proposed solution.Item Efficient On-Demand Multi-Node Charging Techniques for Wireless Sensor Networks(Elsevier, 2016-10-01) Khelladi, Lyes; Djenouri, Djamel; Rossi, Michele; Badache, NadjibThis paper deals with wireless charging in sensor networks and explores efficient policies to perform simultaneous multi-node power transfer through a mobile charger (MC).The proposed solution, called On-demand Multi-node Charging (OMC), features an original threshold-based tour launching (TTL) strategy, using request grouping, and a path planning algorithm based on minimizing the number of stopping points in the charging tour. Contrary to existing solutions, which focus on shortening the charging delays, OMC groups incoming charging requests and optimizes the charging tour and the mobile charger energy consumption. Although slightly increasing the waiting time before nodes are charged, this allows taking advantage of multiple simultaneous charges and also reduces node failures. At the tour planning level, a new modeling approach is used. It leverages simultaneous energy transfer to multiple nodes by maximizing the number of sensors that are charged at each stop. Given its NP-hardness, tour planning is approximated through a clique partitioning problem, which is solved using a lightweight heuristic approach. The proposed schemes are evaluated in offline and on-demand scenarios and compared against relevant state-of-the-art protocols. The results in the offline scenario show that the path planning strategy reduces the number of stops and the energy consumed by the mobile charger, compared to existing offline solutions. This is with further reduction in time complexity, due to the simple heuristics that are used. The results in the on-demand scenario confirm the effectiveness of the path planning strategy. More importantly, they show the impact of path planning, TTL and multi-node charging on the efficiency of handling the requests, in a way that reduces node failures and the mobile charger energy expenditure.Item One-Step Approach for Two-Tiered Constrained Relay Node Placement in Wireless Sensor Networks(IEEE Communications Society, 2016-06) Cheli, Ali; Bagaa, Miloud; Djenouri, Djamel; Balasingham, Ilangko; Taleb, TarikWe consider in this letter the problem of constrained relay node (RN) placement where sensor nodes must be connected to base stations by using a minimum number of RNs. The latter can only be deployed at a set of predefined locations, and the two-tiered topology is considered where only RNs are responsible for traffic forwarding. We propose a one-step constrained RN placement (OSRP) algorithm which yields a network tree. The performance of OSRP in terms of the number of added RNs is investigated in a simulation study by varying the network density, the number of sensor nodes, and the number of candidate RN positions. The results show that OSRP outperforms the only algorithm in the literature for two-tiered constrained RNs placement.